Peregrine Semiconductor Announces the Industry’s Highest Performance Phase Lock Loop ICs With Embedded EEPROM

Enabled by Peregrine’s UTSi CMOS, High-Density Embedded EEPROM Technology

SAN DIEGO, Calif. February 25, 2002 Peregrine Semiconductor, an innovative supplier of high-performance integrated circuits for the optical networking and wireless communications markets, today announced the first two products of a new family of high performance Phase Lock Loop (PLL) synthesizers with embedded EEPROM memory, ideal for fixed frequency applications. The PE3341 and PE3342 operate up to 2800 MHz and exhibit excellent phase noise characteristics.

The PE3341/PE3342 Ultra-Thin-Silicon (UTSi) PLLs contain an embedded 20-bit EEPROM memory that can be programmed to set the PLL counter values at device power-up. This eliminates the need for any external programming support logic for fixed frequency applications. They also contain a serial programming interface enabling operation as a standard programmable PLL. In this mode it is programming compatible with Peregrine’s PE3340 PLL.

The PLLs will be available in a 24-lead TSSOP package and will support operating frequencies of 500 MHz to 2800 MHz. They exhibit industry leading phase noise performance of 86dBc/Hz, typical with a comparison frequency of 1 MHz at a 10 kHz offset from a center frequency of 2800 MHz. Programming of the EEPROM will be supported on industry standard programming systems and, for high-volume requirements, the PE3341/PE3342 can be mass-programmed in the factory per customer specifications.

“The PE3341 and PE3342 are our first EEPROM product embodiments that open up the vast possibilities to further enhanced integrated solutions by utilizing embedded non-volatile memory. Possibilities include storing multiple frequency steps in a synthesizer for frequency hopping radios or implementing a calibration table for linearizing integrated VCOs,” said Stav Prodromou, chief executive office of Peregrine Semiconductor. “Peregrine’s UTSi CMOS technology allows high-density EEPROM to be easily and economically embedded in a variety of wireless and wireline product solutions.”

The PE3341/PE3342 encompass a 10/11 dual modulus prescaler, a 4-bit swallow counter, a 9-bit main counter, and a 6-bit reference counter. The PE3341 is designed with an integrated charge pump output while the PE3342 is designed with a digital phase detector output. They operate on a nominal 3-volt supply with a total current consumption of less than 30mA.

Pricing for the PE3341 and PE3342 starts at $6.95 per unit in volumes of ten thousand.

Demonstration samples are now available through Peregrine in limited quantities.

About Peregrine Semiconductor:

Peregrine Semiconductor Corporation designs, manufactures, and markets high-speed communications integrated circuits for the broadband fiber, wireless and satellite communications markets. Using its patented Ultra-Thin-Silicon (UTSi) CMOS process, Peregrine has launched a series of radio frequency IC products for high-growth applications, including CDMA digital cellular, Bluetooth personal area wireless networks and wireless remote sensing and control. Peregrine, headquartered in San Diego, California, also has established design centers and satellite operations in Chicago, Ill., Aix-En-Provence, France, and Sydney, Australia. Peregrine has established a mission to leverage its unique UTSi process to become a leading supplier of high-speed communications ICs for wireless and wired communications, and compelling photonic components for advanced optical networks. The company’s UTSi process offers very high performance coupled with the integration, scalability, simplicity and flexibility of conventional CMOS.  Additional information on Peregrine Semiconductor is available on its web site: www.peregrine-semi.com. Contact Peregrine’s worldwide distribution partner, Richardson Electronics (Nasdaq: RELL), for sales information at 1-800-737-6937.

###

Peregrine, the Peregrine logo, Peregrine Semiconductor Corporation, and UTSi are trademarks of Peregrine Semiconductor Corporation.

Markets

Power Management

Markets

  • High Linearity RF Switches

    Industry-leading linearity and RF performance
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Monolithic CMOS solution that integrates RF, analog and digital
    Best-in-class ESD and reliability
  • High Isolation RF Switches

    Industry-leading isolation and RF performance
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Monolithic CMOS solution that integrates RF, analog and digital
    Best-in-class ESD and reliability
  • Low Insertion Loss RF Switches

    Industry-leading insertion loss and RF performance
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Monolithic CMOS solution that integrates RF, analog and digital
    Best-in-class ESD and reliability
  • Antenna Tuning Switches

    Industry-leading RF power handling and ruggedness
    Best-in-class harmonic and linearity
    Small form factor with robust ESD and reliability
  • 75Ω Wired Broadband Switches

    Unmatched linearity performance for DOCSIS 3.1
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Monolithic CMOS solution that integrates RF, analog and digital
    Best-in-class ESD ratings and reliability
  • Broadband RF Switches

    Wideband support with a frequency range from 0 Hz to 67 GHz
    Industry-leading insertion loss, isolation, linearity and settling time
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Best-in-class ESD and reliability
  • High Power Switches

    Industry-leading power handling and RF performance
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Monolithic CMOS solution that integrates RF, analog and digital
    Best-in-class ESD and reliability
  • Automotive Switches

    AEC-Q100 Grade 2-certified supporting temperatures up to +105°C
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Monolithic CMOS solution that integrates RF, analog and digital
    Best-in-class ESD and reliability
  • Extended Temperature RF Switches

    Wide temperature range support from -55°C to +125°C
    HaRP™ technology enhancement reduces gate lag and insertion loss drift
    Monolithic CMOS solution that integrates RF, analog and digital
    Best-in-class ESD and reliability
  • 75Ω Wired Broadband RF Digital Step Attenuators

    High linearity, fast switching time with wide bandwidth
    Best-in-class attenuation error with fine attenuation steps
    Monolithic CMOS solution that integrates RF, analog and digital
    Excellent ESD protection and reliability
  • Glitchless RF Digital Step Attenuators

    High linearity, fast switching time with wide bandwidth
    Best-in-class attenuation error with fine attenuation steps
    Monolithic CMOS solution that integrates RF, analog and digital
    Excellent ESD protection and reliability
  • General-purpose RF Digital Step Attenuators

    High linearity, fast switching time with wide bandwidth
    Best-in-class attenuation error with fine attenuation steps
    Monolithic CMOS solution that integrates RF, analog and digital
    Excellent ESD protection and reliability
  • 2.4 GHz IoT FEMs

    Industry-leading monolithic Wi-Fi RF front-end solutions
    High linearity performance for Wi-Fi 6 and W-Fi 6E
    Compact form factors integrating high-performance RF, analog and digital
    Best-in-class ESD and reliability
  • Phase Shifters

    Ideal solutions for optimizing transmission phase angle
    Low root-mean-square (RMS) phase and amplitude error with fine phase resolution
    Digital control interface with parallel and serial programming options
    Best-in-class ESD and reliability
  • Monolithic Phase & Amplitude Controllers (MPACs)

    Reliable phase and amplitude control for next-generation communications
    Monolithic CMOS solution that integrates RF, analog and digital
    Integrated solution for Doherty power amplifier optimization (MPAC–Doherty)
  • Digital Tunable Capacitors (DTCs)

    Small form factor with high Q
    Monolithically integrated impedance tuning solution
    Wide-band tuning coverage, minimum mismatch losses, high linearity and fast switching speed
    Best-in-class ESD and reliability
  • Power Limiters

    Highly integrated solutions, smaller and more reliable than PIN-diode solutions
    Adjustable threshold control for maximum design flexibility
    High power handling and linearity required for wide-dynamic-range designs
    Fast response and recovery times for instantaneous protection and rapid return
  • Prescalers

    Exceptional performance with high-frequency support up to 13.5 GHz
    Low phase noise performance and low power consumption solutions
    Bare-die solutions for a wide variety of compact high-performance applications
    Best-in-class ESD and reliability
  • Mixers

    Broadband quad MOSFET array cores for high performance
    Industry-leading linearity, isolation and low conversion loss
    Available in MSOP, DFN and QFN packages
    Best-in-class ESD and reliability
  • Switch LNA

    Integrates dual-channel LNA with bypass function & high-power switch
    20W average RF input power
    Low noise figure of 0.9 dB
    +105°C operating temperature

Power Management

RF Mixers & Limiters

Front End Modules

RF Phase & Amplitude Control

Skip to content