ICs enable smaller main and diversity antennas with improved RF performance
San Diego, California, Feb. 25, 2013 — Peregrine Semiconductor Corporation (NASDAQ: PSMI), a fabless provider of high-performance radio frequency integrated circuits (RFICs), today announced from Mobile World Congress in Barcelona it has expanded its DuNE™ Digitally Tunable Capacitor (DTC) product line with six second-generation devices for antenna tuning in 4G LTE smartphones. The PE623060, PE623070, PE623080 and PE 623090 (PE6230x0) DTCs have a capacitance range of 0.6 – 7.7 pF and support main antenna power handling of up to +34 dBm. The PE621010 and PE621020 (PE6210x0) DTCs have a capacitance range of 1.38 to 14.0 pF and are optimized for power handling of up to +26 dBm, making them well suited for diversity antennas. All of the new DTCs are manufactured on Peregrine’s UltraCMOS® technology process, with HaRP™ technology enhancements that enable the devices to meet the challenging harmonic and linearity requirements of LTE. The highly-versatile devices support a wide variety of tuning circuit topologies, with an emphasis on impedance matching and aperture-tuning applications. They extend Peregrine’s high-performance tuning roadmap, which was first introduced to the market in 2008.
“Smartphones are now required to support a subset of the more than 40 different LTE frequency bands as well as MIMO and carrier aggregation,” said Dylan Kelly, vice president of Peregrine Semiconductor’s Mobile Wireless Solutions business unit. “To keep up, these devices now contain multiple antennas, making it difficult to keep the end device thin and slim. Tuning the antenna solution with DuNE DTCs enables the system to support multiple bands, while at the same time reducing antenna size and providing optimal RF performance.”
The PE6230x0 and PE6210x0 product families enable designers to develop smaller, higher- performing antennas. Antenna tuning functions, including bias generation, integrated RF filtering and bypassing, control interface, and ESD protection of 2 kV HBM, are incorporated into a slim, 2 mm x 2 mm x 0.55 mm package. All decoding and biasing are integrated on-chip, and no external bypassing or filtering components are required. The devices offer superior tuning accuracy, quality factor, linear step size, and tuning ratio, combined with excellent power handling and temperature stability. They are controlled through the widely-supported 3-wire (SPI-compatible) interface and are easy to incorporate into the RF Front-End design. The DTCs provide a monolithically-integrated antenna-tuning solution that improves Total Radiated Power (TRP), with direct battery voltage operation, enabling a more efficient smartphone with extended battery life.
PE6230x0 Product Family Features
The PE6230x0 DTCs are optimized for key cellular frequency bands from 700 to 2,700 MHz, featuring direct battery voltage operation with consistent performance enabled by on-chip voltage regulation. They have IIP3 of >+70 dBm at 50 Ohm, and exceptional harmonic performance of 2fo/3fo = -40/-50 dBm @ 34 dBm RF (900 MHz) and 32 dBm RF (1900 MHz). The 5-bit, 32-state PE623060/70/80 DTCs have a capacitance range of 0.9 to 4.6 pF (5.1:1 tuning ratio) in discrete 119 fF steps; 0.85 to 2.4 pF (2.82:1 tuning ratio) in discrete 50 fF steps; and 2.15 – 7.7 pF (3.6:1 tuning ratio) in discrete 180 fF steps, respectively. The 4-bit, 16-state PE623090 DTC has a capacitance range of 0.6 to 2.35 pF (3.9:1 tuning ratio) in discrete 117 fF steps. The lower minimum capacitance of the PE623090 DTC solves a critical problem in high-frequency tuning.
PE6210x0 Product Family Features
The 5-bit, 32-state PE6210x0 DTCs support the 100 to 3,000 MHz frequency range. These DTCs extend the range of diversity antennas and improve data rates by optimizing the antenna performance at the operating frequency. The PE621010 DTC has a capacitance range of 1.38 – 5.90 pF (4.3:1 tuning ratio) in discrete 146 fF steps; the PE621020 of 1.88 – 14.0 pF (7.4:1 tuning ratio) in discrete 391 fF steps.
Development Tool Support
Peregrine also announced the PE6230x0 and PE6210x0 Evaluation Kits today, to help designers get started using the new DTCs in their applications. The kits include an interface board and USB cable to enable quick evaluation, prototyping, and debugging via simple-to-use Graphical User Interface (GUI)-based control software. They can be ordered today, through Peregrine’s global direct sales team.
Packaging & Availability
The PE6230x0 and PE6210x0 DTCs are available in a 10- and 12-lead, 2 mm x 2 mm QFN packages, respectively. Samples and volume-production quantities can be ordered today, through Peregrine’s global direct sales team.
About Peregrine Semiconductor
Peregrine Semiconductor (NASDAQ: PSMI) is a fabless provider of high-performance radio frequency integrated circuits (RFICs). Our solutions leverage our proprietary UltraCMOS® technology, an advanced RF Silicon-On-Insulator process. Our products deliver what we believe is an industry-leading combination of performance and monolithic integration, and target a broad range of applications in the aerospace and defense, broadband, industrial, mobile wireless device, test and measurement equipment, and wireless infrastructure markets. Additional information is available at https://psemi.bonfirela.com.
###
The Peregrine Semiconductor name, logo, and UltraCMOS are registered trademarks of Peregrine Semiconductor Corporation in the U.S.A., and other countries. DuNE and HaRP are trademarks of Peregrine Semiconductor Corporation in the U.S.A., and other countries. All other trademarks are the property of their respective owners.